 |
Cleveland - 80 Gallon Steam Jacketed Electric Kettle
Model: KGL-80-T |
|
All stainless steel steam jacketed kettle. It has a 2" Tangent Draw-Off and tilts as well! The bracket that hold the cover to the frame is broken, but should be able to be fixed. This unit also has it's own faucet on the side. 33" dia x 28" deep. - 115 volt, 60 hz, 10 amp.
- 304 stainless steel with #4 finish on kettle and supports.
- 50 PSI Steam Jacket Rating and Safety Valve
- Overall dimensions: 53"W x 51"D x 44.75"H.
|
| Location: Barrie Warehouse - Item#: 3379 |
|
 |
Langen - Auto Load, Horizontal Cartoner
Model: B1 |
|
| This is a horizontal auto load cartoner with Nordson Model- 2302, hot melt glue system. It has a 9" pitch and is variable speed. Autoloader buckets measure- 11" long x 3" wide x 2.5" high. 600 volt, 3 phase, 60 hz. Last used for single sleaves of crackers. |
| Location: Barrie Warehouse - Item#: 3414 |
|
 |
Clamco - Automatic L Bar Sealer
Model: 6600 |
|
- Fully automatic
- Comes with a extra, new set sealing knifes
- Seal area- 20" x 24"
- On casters
- 120 volt, 1 phase, 60 cycle, 20 amp, + air
|
| Location: Barrie Warehouse - Item#: 3384 |
|
 |
Bi line - Conveyor
Model: BL 84-13-8 |
|
- 2 units available!!!
- All stainless steel
- On casters
- Variable speed
- Year 2000
- Overall- 17" wide x 156" long
- 8' wide belt x 125" long
|
| Location: Barrie Warehouse - Item#: 3403 |
|
 |
JDA - Depositor
Model: |
|
- 2 units available!!!
- All stainless steel construction
- Air operated
- Foot switch activated
- 1" dia x 8" long piston
- 12" deep x 20" dia. Stainless steel cone bottom hopper with air assisted product pusher for viscous product
- Filling nozzle can be hand held to fill product or can be fixed to a standard position for filling.
|
| Location: Barrie Warehouse - Item#: 3391 |
|
 |
Preferred Packaging Systems - Heat Tunnel
Model: PP180844EU |
|
- Year- 2005
- On Casters
- Belt is rollers
- Opening- 17.5" wide x 8.25" high
- 220 volt, 1 phase, 50-60 hz, 45 amp
|
| Location: Barrie Warehouse - Item#: 3385 |
|
 |
Kaiser Aluminum Hydro-Matic - Pie or Tart Press
Model: H-201B |
|
- Die has 3 x 4 tart pattern
- 2 x collapsable side tables
- Stainless steel/aluminum contacts
- Push twin safety switches.
- Motor- 230 volt, 10 amp, 1.5 hp, 1 phase + air
- Heaters- 115 volt, 12 amp + air
|
| Location: Barrie Warehouse - Item#: 3381 |
|
 |
Hobart - Planetary Bowl Mixer
Model: L800 |
|
This planetary mixer comes with 1 bowl, whip, hook, and paddle.
- 208 volt, 3 phase, 1.5 hp
|
| Location: Barrie Warehouse - Item#: 3383 |
|
 |
Dosa Pack - Powder Blender
Model: 91 |
|
1-7kg working capacity. Impeller blade design provides for effective mixing of composite powder blends. Conical lid configuration creates a rolling vortex for uniform blending and introduction of binding media if required.
- Specifically designed for integration of colors or flavored powders into base mixes. (i.e. Cosmetics powders, Drink Crystals, baking mixes.)
- Polished stainless steel product contact parts.
- Jacketed blending vessel to provide product cooling if necessary.
- Allen Bradley POWERFLEX Variable speed impeller control provides efficient mixing throughout vessel.
- Ported lid for introduction of liquid media.
- Manual tilting of vessel for easy powder discharge.
- Equipped with a batch timer, variable speed.
- On a stainless steel stand
- Year- 1991
- 460 volt, 3 phase, 3 hp, 15 amp, 60 hz, 24 VAC
|
| Location: Barrie Warehouse - Item#: 3411 |
|
 |
Cazzoli - Powder Blender
Model: Mixer |
|
1-25 kg. working capacity. Impeller blade design provides for effective mixing of composite powder blends. Conical lid configuration creates a rolling vortex for uniform blending and introduction of binding media if required.
- Specifically designed for integration of colors or flavored powders into base mixes. (i.e. Cosmetics powders, Drink Crystals, baking mixes.)
- Polished stainless steel product contact parts.
- Jacketed blending vessel to provide product cooling if necessary.
- Allen Bradley POWERFLEX Variable speed impeller control provides efficient mixing throughout vessel.
- Ported lid for introduction of liquid media.
- Automatic tilting of vessel for easy powder discharge.\
- Unit is also equipped with a batch timer.
- 480 volt, 3 phase, 20 amp, 60 hz, 24 AC
|
| Location: Barrie Warehouse - Item#: 3412 |
|
 |
Emplex - Rotary Band Sealer with conveyor
Model: 5-5C3LA128 |
|
- 12" wide x 103" Long food grade conveyor. with 2.5" wide x 9' Long bottom conveyor.
- Adjustable conveyor angle
- On casters
- Excellent condition
- Designed for horizontal and angled sealing applications
|
| Location: Barrie Warehouse - Item#: 3388 |
|
 |
Waukesha - Rotary Lobe Pump
Model: Size- 3 |
|
| On a cart with casters. This unit has stainless steel lobes, and was last used for cosmetics. It has a variable speed controller, and a flow rate meter. It also has a 1/2" dia. inlet/outlet, which is threaded (not sani-clamp connection). 250 volt, 1/4 hp, 20 amp. |
| Location: Barrie Warehouse - Item#: 3413 |
|
 |
- S Shaped Conveyor -
Model: |
|
- 12" wide belt x 9' long
- On casters
- Stainless steel frame
- 230/460 volt drive
|
| Location: Barrie Warehouse - Item#: 3390 |
|
| |
|
